Flush-Type Grease Nipples
according to DIN 3405
APPLICATION AREA
Flush-type grease nipples are particularly suitable for installations where extending or protruding nipples cannot be used.
VERSIONS
In general, our flush-type grease nipples according to DIN are made of steel, zinc-plated and passivated, and they are featured with a cylindrical thread. Of course, our flush-type nipples are also available in different angle versions, with a self-forming thread, or as drive-in type. We offer various standard types also in brass or stainless steel V2A/V4A.
Upon request, UMETA manufactures flush-type grease nipples in further versions, with respect to e. g.
- dimension
- material
- thread size
- thread form (e. g. with tapered thread)
- different opening pressure
- surface colour (e. g. yellow passivated)
- further surface treatment
- etc.
OPERATING INSTRUCTIONS
Flush-type nipples are only suitable for press-greasing by means of a UMETA extension tube or a UMETA push-type grease gun with pointed, pin-pointed, or combi-nozzle.
Flush-Type grease nipples D1/S with self-forming thread
straight version A - 180°
Flush-Type grease nipples D1a, drive-in-version
straight version A - 180°
Flush-Type grease nipples D2a, drive-in-version
angled version B - 45°
Flush-Type grease nipples D3a, drive-in-version
angled version C - 90°
